Weha V-Cart Flip Cart

This cart has a capacity of 2200 lb and can be used for Granite, Marble, Quartz, Engineered Stone, Quartzite, other Natural Stone. It is made for moving stone from bridge saws to cnc machines, line machines, etc. One of the features allows you to flip the stone from the polished side to the back side and vice versa.

You can use this cart by loading stone onto the bridge saw with the polished side up. After cutting the piece, the piece then moves to the cnc machine where the polished side is now facing down. It has 4 posts that are removable with 8 different post positions. Simply take 2 of the posts out.

Using the Vacuum Lifter, you can move the stone (polished side up) to the V-Cart and rest it against the 2 posts. This will put the back side of the stone against the posts. Now insert the 2 post that was previously removed and lean the stone against them. Now the polished side is against the post.
Remove the first 2 posts and use the vacuum lifter to easily access the back of the stone. Now the stone can be loaded on the CNC machine polished side down.

The Weha V-Cart Flip Cart comes with 8" heavy duty caster wheels, 2 fixed and 2 swivel locking wheels. With a weight capacity of 2200 lbs, the Weha V-Cart Flip Cart can be used for moving pieces all over the shop from one work station to the next.


Specifications:

• Base is a solid 38" x 36" platform that can easily hold stone without the concern of turning over
• 38" x 36" x 59 1/2"
• 4 Posts: 2 x 2 x 47 1/2" square tube posts lined with rubber
• Spread at bottom between posts for stone placement: 9 1/2"
• 8 receivers for posts
• 8" diameter wheels -2 fixed and 2 swivel locking